{"title":"Hybrid Racing Shifter with Cable Combos","description":"","products":[{"product_id":"hybrid-racing-short-shifter-shifter-cable-combo-06-11-civic","title":"Hybrid Racing - V3 Short Shifter \u0026 Shifter Cable Combo (06-11 Civic)","description":"\u003cdiv\u003e\u003cstrong\u003eIf you would like this installed on your vehicle, you must be able to drive to our new location. Please call to set an appointment for installation. A coupon with directions will be included in the package.\u003c\/strong\u003e\u003c\/div\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli\u003eSmooth, precise, and direct shifts\u003c\/li\u003e\n\u003cli\u003eAdjustable Left\/Right and Front\/Back throw from\u003c\/li\u003e\n\u003cli\u003eSealed ball bearings that reduce friction\u003c\/li\u003e\n\u003cli\u003eRace tested for durability \u0026amp; reliability\u003c\/li\u003e\n\u003cli\u003e1.5 inches of height adjustability\u003c\/li\u003e\n\u003cli\u003eAnodized Billet Aluminum \u0026amp; Stainless Steel construction.\u003c\/li\u003e\n\u003cli\u003eBillet aluminum bushings.\u003c\/li\u003e\n\u003cli\u003eStainless steel cables and cable guides.\u003c\/li\u003e\n\u003cli\u003eThis is for a set of 2 cables.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\" id=\"tab1\"\u003e\n\u003cp\u003e\u003cstrong\u003eSHIFTER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAfter developing Shifter Cables, Shifter-Cable Bushings, Shifter-Base Bushings, and the original Clutch Master Cylinder Upgrade for the 8th Gen Civic we realized there was only one piece left that needed our attention... the shifter! We continue to strive for ultimate performance and reliability so we took our original 06-11 Civic shifter assembly and sent it back to the drawing board.\u003c\/p\u003e\n\u003cp\u003eAfter countless hours of design, engineering, and testing we completed a major overhaul of our shifter system. As a commitment to our customers, we are proud to offer a refreshed version of the most popular short shifter assembly for the 8th generation Honda Civic chassis!\u003c\/p\u003e\n\u003cp\u003eInitial stages of the short shifter design involved culling through forums and talking with 8th Gen Civic owners, looking for the Pros and Cons of the stock shifter as well as other short shifter upgrades that were available at the time. This wasn’t the first time we’d designed a shifter assembly, so there were already a lot of features we knew we wanted to include in this unit. Among those features was an unparalleled level of adjustability, so that each driver could tweak every aspect of the shifter to suit their own preference. Ultimately, what we developed was a durable, versatile short shifter that is simple enough to allow an affordable price, so you can have your race car without eating ramen noodles for a month.\u003c\/p\u003e\n\u003cp\u003eThe shifter’s frame is constructed from TIG-welded, powder-coated, 1000 Series steel. The Dust-Gold anodized upper and lower rocker assemblies are now made of single pieces of Aerospace aluminum and feature custom sealed ball bearings to reduce friction. The new V2 shifter is 60% smoother than the original version requiring much less physical effort to row through gears all while being significantly lighter. Shift throw adjustment is achieved using two threaded cable attachment pins, meaning fine tweaks can be made to shift throw, allowing you to dial in the exact throw that suits your shifting style. Each attachment pin features a wear-resistant Delrin pivot cap for sturdy, quiet operation. New dual, zinc-plated extension springs replace the OEM style torsion centering spring for better-centering action and a more direct feel.\u003c\/p\u003e\n\u003cp\u003eThe front\/back throw and left\/right throw can be adjusted independently and figures for throw reduction are shown below:\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCABLES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Hybrid Racing cables are a performance upgrade replacement for stock OEM cables. The solid rod ends, 30% thicker cable core and spherical bearings give the Hybrid Racing cables a firmer, tighter feel over OEM cables resulting in fewer missed shifts and a more connected feel to the chassis.\u003c\/p\u003e\n\u003cp\u003eWe created a cable to give people peace of mind and improved driving performance when they shift hard and during demanding racing applications and the Hybrid Racing performance cables achieve this goal!\u003c\/p\u003e\n\u003cp\u003eOther notable features of the Hybrid Racing cables are spherical bearings, stainless steel push rods, and upgraded stainless steel swivel support tubes (oem are plastic) that are known to break on the OEM cables. All of the rod ends, and mounting bushings are CNC machined 6061 aluminum that have been heat-treated and coated with a black hard anodized before being laser etched with the Hybrid Racing logo and flair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these cables a direct replacement for my OEM 8th gen style cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We include a new rubber grommet that goes around the OEM cables, so you do not have to re-use your OEM grommet. The OEM cable that controls the right\/left motion of the shifter has been upgraded from a plastic twist-lock bushing to aluminum bushings and spring clip.  This aluminum bushing simplifies installation a bit, but more importantly, it gets rid of yet another plastic part that tends to flex on the OEM cables, leading to a sloppy feeling shift. The extra spring clip that you will need to install the Hybrid Racing cables is included with the cables, so you will not need to buy any other parts. An easy to follow installation tips sheet is included with each set of cables to make installation as worry-free as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included with these shifter cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit comes with two shifter cables; each shifter cable set includes two cotter pins, clips for the shifter end, and transmission selector lever springs. Each set also comes with a new rubber grommet for the hole in your firewall. Also, all shifter cables come with upgraded transmission gear selector springs. These aren't required but are recommended to further improve your driving experience. \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e06-08 8th Gen Honda Civic Si:-front\/back adjustable from 80%-48% stock throw (20%-52% reduction)-left\/right adjustable from 83%-47% stock throw (17%-53% reduction)\u003c\/li\u003e\n\u003cli\u003e09-11 8th Gen Honda Civic Si:-front\/back adjustable from 87%-52% stock throw (17%-48% reduction)-left\/right adjustable from 90%-49% stock throw (10%-51% reduction)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\n\u003cp\u003eBeyond simple throw reduction, we have built-in a feature that many 8th Gen Civic owners have long desired but never had: shift knob height adjustment. Our simple single-bolt height adjustment design (borrowed from our popular k-swap shifters) allows the knob to be adjusted higher or lower than stock (within a 1.5″ total range) with only a 5mm allen wrench. Now you can tweak the shifter’s throw AND knob position independently until the shifter functions exactly the way you want it to.\u003c\/p\u003e\n\u003cp\u003eThis short shifter assembly is designed so that base bushings are not needed, meaning there’s no need to spend extra money on solid shifter base bushings. The shifter is compatible with OEM 8th Gen Civic cables, or our performance 8th Gen Civic cables. This shifter will work on both the base model R18 platform, as well as the Si’s K20 platform.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab3\"\u003e2006-2011 Honda Civic, Si and Type R\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Red","offer_id":33108819902569,"sku":null,"price":827.98,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":33108819968105,"sku":null,"price":827.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0296\/2355\/0057\/products\/HYB-BUN-01-08.png?v=1615835881"},{"product_id":"hybrid-racing-short-shifter-assembly-shifter-cable-combo","title":"Hybrid Racing V3 Short Shifter \u0026 Shifter Cable Combo (02-06 RSX)","description":"\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eIf you would like this installed on your vehicle, you must be able to drive to our new location. Please call to set an appointment for installation. A coupon with directions will be included in the package.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003eMind Blowing Precise Shifts!\u003c\/li\u003e\n\u003cli\u003e10-50% Adjustable throw and gate spacing.\u003c\/li\u003e\n\u003cli\u003eAdjustable Shift Height.\u003c\/li\u003e\n\u003cli\u003eBall Bearings For Fluid Motion.\u003c\/li\u003e\n\u003cli\u003eSpherical Bearing \u0026amp; Aluminum End Links\u003c\/li\u003e\n\u003cli\u003eSolid rod ends and spherical bearings (not rubber like OEM cables).\u003c\/li\u003e\n\u003cli\u003eBillet aluminum bushings.\u003c\/li\u003e\n\u003cli\u003eStainless steel cables and cable guides.\u003c\/li\u003e\n\u003cli\u003eThis is for a set of 2 cables.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli class=\"active\" id=\"tab1\"\u003e\n\u003cp\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/4nYrnFUIOho?rel=0\" width=\"560\" height=\"315\" allowfullscreen=\"\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSHIFTER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe performance of a shifter is everything. It can mean the difference between winning a race and missing a shift, and a high-quality shifter can make your car shift like a new, high-performance machine. At Hybrid Racing, we take our shifters seriously. When we began designing our RSX shifter, we wanted to deliver a product that outperformed all others. We started our design process by incorporating the features that have made our other k-series shifters popular...adjustable height, adjustable shift knob position, and independently adjustable throw and gate spacing. We were the first to deliver features like this when we released our k-swap shifter over 5 years ago, and we have been refining our designs ever since. Our RSX shifter's performance is the best testament to this constant refinement.\u003c\/p\u003e\n\u003cp\u003eWe wanted to develop a shifter that felt great even after years of use and abuse. With that in mind, we incorporated a proprietary wear-compensating pivot ball design. We also used teflon-lined end links and spherical bearings to provide silky smooth short shifts and plenty of durability. To ensure everything worked as intended, we built a custom machine that cycled the shifter through all of the gears over 1.5 million times. To make sure we were leading the pack, we even put competing shifters on the same rig. No competing shifter lasted more than 10% as long as ours without seeing severe, performance hindering wear.\u003c\/p\u003e\n\u003cp\u003eWhen it comes to adjustability, this RSX shifter truly shines. Adjustments are a breeze and can give you many different options in terms of shift feel. With just the turn of a single 5mm allen wrench, you can adjust your shift knob to be 2\" taller or 1\" lower than stock. With the same allen wrench, you can adjust the knob position, bringing it closer to or further from the steering wheel, meaning you can shift quickly and keep your hands on the wheel. Want your shifts a little shorter? This shifter can reduce throw anywhere from 10% to 50% (below stock throw) by just loosening the cable retaining bolt with a 10mm wrench and repositioning it. Gate spacing (left-right shifter motion) is also adjustable. This means that if you like short throws and wide gates, long throws and narrow gates, or any other combination, you can custom tailor it to your preference. The custom bell-crank style rocker design allows a larger adjustment range than competing shifters without putting your cables at risk of extreme angles, which is why many short throw adapters damage OEM cables.\u003c\/p\u003e\n\u003cp\u003eA quick look at the materials used on our RSX shifter reveals a design that cuts no corners. The base plate is made from formed and welded A6 steel with dimpled holes to improve rigidity. The rockers feature full 6061-T6 aluminum construction with oil-impregnated bronze bushings that are designed to provide quiet operation with no need for lubrication. The shift levers are made from stainless steel to avoid unsightly corrosion. Even the centering springs received special attention when we had them custom wound and installed inside of a rubber sleeve to cut down on noise during shifts.\u003c\/p\u003e\n\u003cp\u003eWith its superior construction, adjustability, and unmatched testing and performance, this short shifter is second to none.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCABLES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Hybrid Racing cables are a performance upgrade replacement for stock OEM cables. The solid rod ends, 30% thicker cable core and spherical bearings give the Hybrid Racing cables a firmer, tighter feel over OEM cables resulting in fewer missed shifts and a more connected feel to the chassis.\u003c\/p\u003e\n\u003cp\u003eWe created a cable to give people peace of mind and improved driving performance when they shift hard and during demanding racing applications and the Hybrid Racing performance cables achieve this goal!\u003c\/p\u003e\n\u003cp\u003eOther notable features of the Hybrid Racing cables are spherical bearings, stainless steel push rods, and upgraded stainless steel swivel support tubes (oem are plastic) that are known to break on the OEM cables. All of the rod ends, and mounting bushings are CNC machined 6061 aluminum that have been heat treated and coated with a black hard anodized before being laser etched with the Hybrid Racing logo and flair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these cables a direct replacement for my OEM RSX style cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! For RSX Chassis the only extra work that is needed will be to retrofit the original cable gromment onto thew new HR cables. For K-Swap applications they run outside the car so no RSX grommet is neccesary. The OEM cable that controls the right\/left motion of the shifter has been upgraded from a plastic twist-lock bushing to aluminum bushings and spring clip. This aluminum bushing simplifies installation a bit, but more importantly, it gets rid of yet another plastic part that tends to flex on the OEM cables, leading to a sloppy feeling shift. The extra spring clip that you will need to install the Hybrid Racing cables is included with the cables, so you will not need to buy any other parts. An easy to follow installation tips sheet is included with each set of cables to make installation as worry free as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional K-Swap notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you are using the Hybrid Racing cables on an OEM-style shifter mounted to a Karcepts adapter plate in a K-Swap chassis, you will need to widen the hole for the cable that is controlled by the front\/back motion of the shifter where it goes through the Karcepts adapter plate. The hole needs to be widened to approximately 3\/4\" diameter. A stepped drill bit works well for doing this.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included with these shifter cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAside from 2 shifter cables, each shifter cable set includes 4 cotter pins, and an \"m\" bracket for affixing the shifter cables to the chassis in K swap applications. If you are mounting these into an RSX, this bracket will not be needed. In addition, all shifter cables sets come with upgraded transmission gear selector springs. These aren't required but are reccomended.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab2\"\u003e\n\u003cul\u003e\n\u003cli\u003e2002-2006 Acura RSX\u003c\/li\u003e\n\u003cli\u003e2001-2005 Honda Civic Non-Si\u003c\/li\u003e\n\u003cli\u003eK-Swap Chassis using the transmission from above vehicle.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Red","offer_id":33108819050601,"sku":"HYB-BUN-01-06","price":827.98,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":33108819116137,"sku":"HYB-BUN-01-07","price":827.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0296\/2355\/0057\/products\/HYB-BUN-01-06.png?v=1615835840"},{"product_id":"hybrid-racing-short-shifter-assembly-shifter-cable-combo-02-05-civic-si","title":"Hybrid Racing Short Shifter Assembly \u0026 Shifter Cable Combo (02-05 Civic Si)","description":"\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003cstrong\u003eIf you would like this installed on your vehicle, you must be able to drive to our new location. Please call to set an appointment for installation. A coupon with directions will be included in the package.\u003c\/strong\u003e\n\u003c\/div\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003eSmooth, precise, and direct shifts!\u003c\/li\u003e\n\u003cli\u003eAdjustable Left\/Right and Front\/Back throw from\u003c\/li\u003e\n\u003cli\u003eSealed ball bearings that reduce friction\u003c\/li\u003e\n\u003cli\u003e10-50% Adjustable throw and gate spacing.\u003c\/li\u003e\n\u003cli\u003eSolid rod ends and spherical bearings (not rubber like OEM cables).\u003c\/li\u003e\n\u003cli\u003eStainless steel cables and cable guides.\u003c\/li\u003e\n\u003cli\u003eAnodized Billet Aluminum \u0026amp; Steel construction.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIncluded Heavy Duty Shifter Cable Set for EP3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli id=\"tab1\" class=\"active\"\u003e\u003csstrong\u003e\n\u003cp\u003e\u003cstrong\u003eSHIFTER\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eThe shifter's frame is constructed from TIG-welded, powder-coated, 1000 Series steel. The upper, lower, and side rocker assemblies are made from a single piece of 6061 aluminum, and feature custom sealed ball bearings to reduce friction and require less physical effort to row through gears. Shift throw adjustment is achieved using two threaded cable attachment pins allowing you to dial in the exact throw that suits your shifting style. Each attachment pin features a wear-resistant Delrin pivot cap for sturdy, quiet operation. The shifter also uses zinc-plated extension springs replacing the OEM style torsion centering spring for better-centering action and a more direct feel. The front\/back throw and left\/right throw can be adjusted independently. At the highest setting, you can expect a 20% reduction in throw, and at the lowest setting up to a 50% reduction in throw.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWith its superior construction, adjustability, and unmatched testing and performance, this short shifter is second to none\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSHIFTER CABLES\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eThe Hybrid Racing cables are a performance upgrade replacement for stock OEM cables. The solid rod ends, 30% thicker cable core, and spherical bearings give the Hybrid Racing cables a firmer, tighter feel over OEM cables resulting in fewer missed shifts and a more connected feel to the chassis.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWe created a cable to give people peace of mind and improved driving performance when they shift hard and during demanding racing applications and the Hybrid Racing performance cables achieve this goal!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOther notable features of the Hybrid Racing cables are spherical bearings, stainless steel push rods, and upgraded stainless steel swivel support tubes (OEM are plastic) that are known to break on the OEM cables. All of the rod ends, and mounting bushings are CNC machined 6061 aluminum that have been heat-treated and coated with a black hard anodized before being laser etched with the Hybrid Racing logo and flair.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAre these cables a direct replacement for my OEM EP3 style cables?\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eYes! For EP3 Chassis the only extra work that is needed will be to retrofit the original cable grommet onto the new HR cables. The OEM cable that controls the right\/left motion of the shifter has been upgraded from a plastic twist-lock bushing to aluminum bushings and spring clip. This aluminum bushing simplifies installation a bit, but more importantly, it gets rid of yet another plastic part that tends to flex on the OEM cables, leading to a sloppy feeling shift. The extra spring clip that you will need to install the Hybrid Racing cables is included with the cables, so you will not need to buy any other parts. An easy to follow installation tips sheet is included with each set of cables to make installation as worry-free as possible.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWhat is included with these shifter cables?\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eAside from 2 shifter cables, each shifter cable set includes two cotter pins and two spring clips for attaching the cables to your stock shifter. In addition, all shifter cable sets come with upgraded transmission gear selector springs. These aren't required but are recommended.\u003c\/p\u003e\n\u003csstrong\u003e\u003cstrong\u003e\u003c\/strong\u003e\n\u003cp\u003eThe Hybrid Racing cables are a performance upgrade replacement for stock OEM cables. The solid rod ends, 30% thicker cable core and spherical bearings give the Hybrid Racing cables a firmer, tighter feel over OEM cables resulting in fewer missed shifts and a more connected feel to the chassis.\u003c\/p\u003e\n\u003cp\u003eWe created a cable to give people peace of mind and improved driving performance when they shift hard and during demanding racing applications and the Hybrid Racing performance cables achieve this goal!\u003c\/p\u003e\n\u003cp\u003eOther notable features of the Hybrid Racing cables are spherical bearings, stainless steel push rods, and upgraded stainless steel swivel support tubes (oem are plastic) that are known to break on the OEM cables. All of the rod ends, and mounting bushings are CNC machined 6061 aluminum that have been heat treated and coated with a black hard anodized before being laser etched with the Hybrid Racing logo and flair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these cables a direct replacement for my OEM EP3 style cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! For EP3 Chassis the only extra work that is needed will be to retrofit the original cable gromment onto thew new HR cables. The OEM cable that controls the right\/left motion of the shifter has been upgraded from a plastic twist-lock bushing to aluminum bushings and spring clip. This aluminum bushing simplifies installation a bit, but more importantly, it gets rid of yet another plastic part that tends to flex on the OEM cables, leading to a sloppy feeling shift. The extra spring clip that you will need to install the Hybrid Racing cables is included with the cables, so you will not need to buy any other parts. An easy to follow installation tips sheet is included with each set of cables to make installation as worry free as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included with these shifter cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAside from 2 shifter cables, each shifter cable set includes two cotter pins, and two spring clips for attaching the cables to your stock shifter. In addition, all shifter cables sets come with upgraded transmission gear selector springs. These aren't required but are reccomended.\u003c\/p\u003e\n\u003c\/sstrong\u003e\u003c\/sstrong\u003e\u003c\/li\u003e\n\u003cli id=\"tab2\"\u003e\n\u003cul\u003e\n\u003cli\u003e2002-2005 Honda Civic Si\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Yes","offer_id":33108811350121,"sku":"HYB-BUN-01-10","price":827.98,"currency_code":"USD","in_stock":true},{"title":"No","offer_id":33108811382889,"sku":"HYB-BUN-01-11","price":827.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0296\/2355\/0057\/files\/IMG_0349.webp?v=1751802905"},{"product_id":"hybrid-racing-z3-k-swap-shifter-shifter-cable-combo","title":"Hybrid Racing - Z3 K-Swap Shifter \u0026 Shifter Cable Combo","description":"\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eIf you would like this installed on your vehicle, you must be able to drive to our new location. Please call to set an appointment for installation. A coupon with directions will be included in the package.\u003c\/strong\u003e\n\u003cul class=\"tabs\"\u003e\n\u003cli\u003eUtilize stock K20Z3 transmission.\u003c\/li\u003e\n\u003cli\u003eNO CUTTING or random parts to buy.\u003c\/li\u003e\n\u003cli\u003eHundreds of adjustable positions.\u003c\/li\u003e\n\u003cli\u003eStainless steel \u0026amp; aluminum construction.\u003c\/li\u003e\n\u003cli\u003eSolid rod ends and spherical bearings (not rubber like OEM cables).\u003c\/li\u003e\n\u003cli\u003eStainless steel cables and cable guides.\u003c\/li\u003e\n\u003cli\u003eHigh heat, wire-reinforced sleeve.\u003c\/li\u003e\n\u003cli\u003eThis is for a set of 2 cables.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli id=\"tab1\" class=\"active\"\u003e\n\u003cp\u003e\u003cstrong\u003eSHIFTER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFor years, installing a shifter into a K-swapped vehicle meant cutting a large section out of the chassis’ center tunnel to mount an OEM RSX shifter to a metal plate. This meant that the engine swap was more or less irreversible. That’s why Hybrid Racing developed a bolt-in shifter specifically meant for K-swapped Honda and Acura chassis. After nearly a year of design refinements and testing, we are proud to present our new Z3 transmission compatible k-swap shifter. This is the ONLY bolt-in solution for k-swaps using the Z3 transmission from the 8th generation Civic Si’s. Previously, the only way to have a bolt-in solution was to swap out the z3 transmission’s shift mechanism with an RSX unit, then use RSX cables and our original K-swap shifter.\u003c\/p\u003e\n\u003cp\u003eAfter nearly a year of design refinements and testing, we are proud to present our Z3 transmission compatible k-swap shifter. This is the ONLY bolt-in solution for k-swaps using the Z3 transmission from the 8th generation Civic Si’s. Previously, the only way to have a bolt-in solution was to swap out the z3 transmission’s shift mechanism with an RSX unit, then use RSX cables and our original K-swap shifter. Well, those days are long gone! Now, you can use an unmodified Z3 transmission and OEM Z3 shifter cables (or our 8th Gen Civic Performance Shifter Cables) in your swap by just bolting in this shifter. This design features an array of improvements over our original K-swap shifters. Among these improvements is\u003c\/p\u003e\n\u003cp\u003eThis design features an array of improvements over our original K-swap shifters. Among these improvements is the main pivot point that’s designed to dramatically reduce friction and to automatically compensate for wear as the shifter ages. In addition, every pivot point is isolated using Delrin or Teflon to ensure consistently smooth and quiet operation. A new design philosophy was incorporated into many of the joints to simplify the design while reducing unwanted play between parts. And as always, we have designed this shifter with independently adjustable front\/back and left\/right throw which can be set between 85% and 45% of the OEM 8th Gen Civic shifter.\u003c\/p\u003e\n\u003cp\u003eLike our original k-swap shifter, shift knob height and location are independently adjustable. However, the exact position of the shift knob is easier to adjust thanks to a completely new clamp design. The Hybrid Racing bolt-in Short Shifter mounts to your chassis using (4) M8 bolts. Two bolts utilize the stock bolt holes behind the stock shifter location, and four holes must be drilled in the center tunnel for the other two bolts (no drilling is required if you are replacing a Karcepts shifter adapter plate). The drilled holes are located under the center console cover so that they are hidden once the shifter is installed. A rubber seal is provided with each shifter to help seal the cabin from noise,\u003c\/p\u003e\n\u003cp\u003eThe Hybrid Racing bolt-in Short Shifter mounts to your chassis using (4) M8 bolts. Two bolts utilize the stock bolt holes behind the stock shifter location, and four holes must be drilled in the center tunnel for the other two bolts (no drilling is required if you are replacing a Karcepts shifter adapter plate). The drilled holes are located under the center console cover so that they are hidden once the shifter is installed. A rubber seal is provided with each shifter to help seal the cabin from noise, heat, and debris under the car.\u003c\/p\u003e\n\u003cp\u003eUnlike the stock 8th Gen Civic shifter and most short shifters on the market, the Hybrid Racing shifter features stainless steel (not plastic) pivot ball with wear-compensating, friction-limiting Delrin pivots to keep the shifter feeling tighter longer. All spherical joints are woven PTFE lined chrome-plated steel, opposed to the plastic joints in the Civic shifter that wear out given enough hard shifts. What all of this translates into is a smoother, more solid feeling shift and an overall more durable product.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCABLES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Hybrid Racing cables are a performance upgrade replacement for stock OEM cables. The solid rod ends, 30% thicker cable core, and spherical bearings give the Hybrid Racing cables a firmer, tighter feel over OEM cables resulting in fewer missed shifts and a more connected feel to the chassis.\u003c\/p\u003e\n\u003cp\u003eWe created a cable to give people peace of mind and improved driving performance when they shift hard and during demanding racing applications and the Hybrid Racing performance cables achieve this goal!\u003c\/p\u003e\n\u003cp\u003eOther notable features of the Hybrid Racing cables are spherical bearings, stainless steel push rods, and upgraded stainless steel swivel support tubes (oem are plastic) that are known to break on the OEM cables. All of the rod ends, and mounting bushings are CNC machined 6061 aluminum that have been heat-treated and coated with a black hard anodized before being laser etched with the Hybrid Racing logo and flair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these cables a direct replacement for my OEM 8th gen style cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! We include a new rubber grommet that goes around the OEM cables, so you do not have to re-use your OEM grommet. The OEM cable that controls the right\/left motion of the shifter has been upgraded from a plastic twist-lock bushing to aluminum bushings and spring clip.  This aluminum bushing simplifies installation a bit, but more importantly, it gets rid of yet another plastic part that tends to flex on the OEM cables, leading to a sloppy feeling shift. The extra spring clip that you will need to install the Hybrid Racing cables is included with the cables, so you will not need to buy any other parts. An easy to follow installation tips sheet is included with each set of cables to make installation as worry-free as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included with these shifter cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe kit comes with two shifter cables; each shifter cable set includes two cotter pins, clips for the shifter end, and transmission selector lever springs. Each set also comes with a new rubber grommet for the hole in your firewall. Also, all shifter cables come with upgraded transmission gear selector springs. These aren't required but are recommended to further improve your driving experience. \u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab2\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eWhat chassis is this shifter compatible with?\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Hybrid Racing K Swap Bolt-In Short Shifter is compatible with the following chassis:\u003c\/p\u003e\n\u003cp\u003e1988-1991 Honda CRX\u003cbr\u003e1988-2000 Honda Civic \u003cbr\u003e1992-1997 Honda Del Sol \u003cbr\u003e1989-2001 Acura Integra \u003c\/p\u003e\n\u003cp\u003eIf your car was equipped with an automatic shifter you will need to cut off the factory auto shifter cable bracket that is welded inside of the shift tunnel. Once you do that the installation is the same as a manual trans chassis. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eWhich K-Series transmissions are compatible with this shifter?\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis shifter is compatible with transmissions from the following vehicles.\u003c\/p\u003e\n\u003cp\u003e- 06-11 Civic Si (K20Z3)\u003cbr\u003e- 07-11 JDM Civic Type R (FD2 K20A)\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Yes","offer_id":33108809941097,"sku":"HYB-BUN-01-05","price":827.98,"currency_code":"USD","in_stock":true},{"title":"No","offer_id":33108809973865,"sku":"HYB-BUN-01-04","price":827.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0296\/2355\/0057\/products\/HYB-BUN-01-04.png?v=1615835961"},{"product_id":"hybrid-racing-a2-k-swap-shifter-shifter-cable-combo","title":"Hybrid Racing A2 K-Swap Shifter \u0026 Shifter Cable Combo","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eIf you would like this installed on your vehicle, you must be able to drive to our new location. Please call to set an appointment for installation. A coupon with directions will be included in the package.\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli\u003eStainless Steel and Aluminum Construction\u003c\/li\u003e\n\u003cli\u003eAdjustable throw from 90%-40%\u003c\/li\u003e\n\u003cli\u003eAdjustable knob height and position\u003c\/li\u003e\n\u003cli\u003eAccepts M10x1.5 shift knobs\u003c\/li\u003e\n\u003cli\u003eWorks with OEM center console\u003c\/li\u003e\n\u003cli\u003eNo major modification or cutting necessary\u003c\/li\u003e\n\u003cli\u003eRubber seal and all stainless hardware included\u003c\/li\u003e\n\u003cli\u003eWorks with K20A\/A2\/A3\/Z1 transmissions\u003c\/li\u003e\n\u003cli\u003eSolid rod ends and spherical bearings (not rubber like OEM cables).\u003c\/li\u003e\n\u003cli\u003eBillet aluminum bushings.\u003c\/li\u003e\n\u003cli\u003eStainless steel cables and cable guides.\u003c\/li\u003e\n\u003cli\u003eThis is for a set of 2 cables.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli id=\"tab1\" class=\"active\"\u003e\n\u003cp\u003e\u003cstrong\u003eSHIFTER\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn 2008 we set out to solve one of the largest headaches that K-Series swaps presented. What do you do about the OEM RSX plastic shifter? Well, after a few months of designing and prototyping, we created the very first Bolt-In K-Series swap shifter. Nearly ten years and thousands of shifters later, we have the latest evolution of our innovative design.\u003c\/p\u003e\n\u003cp\u003eThe Hybrid Racing Bolt-In K-Swap shifter allows you to retain the stock center console in your EF, EG, EK, \u0026amp; DC chassis and only requires two small holes to be drilled. It works with both stock DC5 shifter cables and the Hybrid Racing race cables. Our shifter has been race tested in cars all over the world. From California to England to Japan, racers all around the world choose our shifter not only for its reliability but for its ease of install and adjustability.\u003c\/p\u003e\n\u003cp\u003eThe front\/back throw can be adjusted to 3 different settings (100% stock throw, 75% stock throw, and 50% stock throw). The left\/right throw can also be adjusted to 3 different settings (again, 100% stock throw, 75% stock throw, and 50% stock throw). The shift knob can be adjusted to up to 3 inches vertically, and the aluminum offset block can be rotated 360*. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCABLES\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Hybrid Racing cables are a performance upgrade replacement for stock OEM cables. The solid rod ends, 30% thicker cable core and spherical bearings give the Hybrid Racing cables a firmer, tighter feel over OEM cables resulting in fewer missed shifts and a more connected feel to the chassis.\u003c\/p\u003e\n\u003cp\u003eWe created a cable to give people peace of mind and improved driving performance when they shift hard and during demanding racing applications and the Hybrid Racing performance cables achieve this goal!\u003c\/p\u003e\n\u003cp\u003eOther notable features of the Hybrid Racing cables are spherical bearings, stainless steel push rods, and upgraded stainless steel swivel support tubes (oem are plastic) that are known to break on the OEM cables. All of the rod ends, and mounting bushings are CNC machined 6061 aluminum that have been heat-treated and coated with a black hard anodized before being laser etched with the Hybrid Racing logo and flair.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these cables a direct replacement for my OEM RSX style cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes! For RSX Chassis the only extra work that is needed will be to retrofit the original cable grommet onto the new HR cables. For K-Swap applications they run outside the car so no RSX grommet is necessary. The OEM cable that controls the right\/left motion of the shifter has been upgraded from a plastic twist-lock bushing to aluminum bushings and spring clip. This aluminum bushing simplifies installation a bit, but more importantly, it gets rid of yet another plastic part that tends to flex on the OEM cables, leading to a sloppy feeling shift. The extra spring clip that you will need to install the Hybrid Racing cables is included with the cables, so you will not need to buy any other parts. An easy to follow installation tips sheet is included with each set of cables to make installation as worry-free as possible.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional K-Swap notes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you are using the Hybrid Racing cables on an OEM-style shifter mounted to a Karcepts adapter plate in a K-Swap chassis, you will need to widen the hole for the cable that is controlled by the front\/back motion of the shifter where it goes through the Karcepts adapter plate. The hole needs to be widened to approximately 3\/4\" diameter. A stepped drill bit works well for doing this.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is included with these shifter cables?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAside from 2 shifter cables, each shifter cable set includes 4 cotter pins and an \"m\" bracket for affixing the shifter cables to the chassis in K swap applications. If you are mounting these into an RSX, this bracket will not be needed. In addition, all shifter cable sets come with upgraded transmission gear selector springs. These aren't required but are recommended.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab2\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eWhat chassis is this shifter compatible with?\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Hybrid Racing K Swap Bolt-In Short Shifter is compatible with the following chassis:\u003c\/p\u003e\n\u003cp\u003e1988-1991 Honda CRX\u003cbr\u003e1988-2000 Honda Civic \u003cbr\u003e1992-1997 Honda Del Sol \u003cbr\u003e1989-2001 Acura Integra \u003c\/p\u003e\n\u003cp\u003eIf your car was equipped with an automatic shifter you will need to cut off the factory auto shifter cable bracket that is welded inside of the shift tunnel. Once you do that the installation is the same as a manual trans chassis. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cu\u003eWhich K-Series transmissions are compatible with this shifter?\u003c\/u\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis shifter is compatible with transmissions from the following vehicles.\u003c\/p\u003e\n\u003cp\u003e- 01-06 JDM Integra Type R (Y2M3)\u003cbr\u003e- 01-05 JDM Civic Type R (NPR3)\u003cbr\u003e- 02-04 RSX Type-S (X2M5)\u003cbr\u003e- 02-06 UKDM\/EDM Civic Type R (NPQ3)\u003cbr\u003e- 02-06 Base RSX (W2M5)\u003cbr\u003e- 05-06 RSX Type S (NSN4)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Default Title","offer_id":33108803813481,"sku":"HYB-BUN-01-02","price":827.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0296\/2355\/0057\/products\/HYB-BUN-01-02.png?v=1615835942"},{"product_id":"hybrid-racing-short-shifter-shifter-cable-combo-12-15-honda-civic","title":"Hybrid Racing Short Shifter \u0026 Shifter Cable Combo (12-15 Honda Civic)","description":"\u003cmeta charset=\"utf-8\"\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong\u003eIf you would like this installed on your vehicle, you must be able to drive to our new location. Please call to set an appointment for installation. A coupon with directions will be included in the package.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli\u003eInternal Spring Design for smooth shifting\u003c\/li\u003e\n\u003cli\u003e5%-45% Adjustable throw and gate spacing\u003c\/li\u003e\n\u003cli\u003eAdjustable knob height\u003c\/li\u003e\n\u003cli\u003eAdjustable knob position (360*)\u003c\/li\u003e\n\u003cli\u003eFour link wishbone design\u003c\/li\u003e\n\u003cli\u003eStainless steel bearings\u003c\/li\u003e\n\u003cli\u003eRigid powder-coated steel frame\u003c\/li\u003e\n\u003cli\u003eIncludes 140mm stainless steel shift rod\u003c\/li\u003e\n\u003cli\u003eIncludes Hybrid Racing Shifter Cables (9th Gen Civic)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul class=\"tabs-content\"\u003e\n\u003cli\u003eThe performance of a shifter is critical. It can mean the difference between winning a race or blowing an engine. A high-quality shifter can make your car shift better, faster, and more accurately. It saves you fractions of a second and on track, that could be all you need to win. In 2006 we developed our first fully adjustable short shifter. Over the years, we have continually improved the designs to ensure flawless performance for your vehicle, which is now available for the 2012-2015 9th Generation Civic!\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab1\" class=\"active\"\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003eWhen it comes to adjustability, our shifter stands alone. Adjustments are a breeze and allow for you to tune your shifter to your specific needs. With just the turn of a single 5mm Allen wrench, you can adjust your shift knob to be 2\" taller or .5\" lower than stock. With the same Allen wrench, you can adjust the knob position, bringing it closer to or further from the steering wheel, meaning you can shift quickly and keep your hands on the wheel. You can even change out the internal spring for a stiffer or lighter shift resistance. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eWant your shifts a little shorter? This shifter can reduce shift throw anywhere from 5% to 45% (below stock throw). Gate spacing (left-right shifter motion) is also adjustable. If you like short throws and wide gates, long throws and narrow gates, or any other combination, you can custom tailor it to your liking.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eOne glance at our shifter, and you can see we cut no corners. The four-link design offers short and crisp shifts while keeping parts and movement to a minimum. Each end link features full 6061-T6 anodized aluminum construction with stainless steel ball bearings designed to provide quiet, smooth operation with no need for lubrication. The shift levers are made from stainless steel to avoid corrosion and keep your shifter shining. All of this sits on a powder-coated lightweight steel frame that has been meticulously welded to create a solid base plate that utilizes no bolts or hardware and can take all the abuse you can throw at it. We believe all of this adds up to the perfect short shifter for your 9th generation Civic. Get yours now only from Hybrid Racing.\u003cbr\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli id=\"tab2\"\u003e\n\u003cb\u003eFits:\u003c\/b\u003e\n\u003cul\u003e\n\u003cli\u003e2012-2015 Honda Civic \/ Civic Si\u003c\/li\u003e\n\u003cli\u003eDOES NOT FIT THE FK2 CIVIC \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Hybrid Racing","offers":[{"title":"Red","offer_id":33108802404457,"sku":"HYB-BUN-01-16","price":827.98,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":33108802469993,"sku":"HYB-BUN-01-15","price":827.98,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0296\/2355\/0057\/products\/HYB-BUN-01-15_939ec1e0-0b5c-4efe-bf99-40ccc6580100.png?v=1615835920"}],"url":"https:\/\/onlinetsm.com\/collections\/hybrid-racing-shifter-with-cable-combos.oembed","provider":"Tri-State Motorsports","version":"1.0","type":"link"}