AEM - Water/Methanol Failsafe Device (Metric 4mm)
Click to zoom in
AEM

AEM - Water/Methanol Failsafe Device (Metric 4mm)

30-3020M
Electronics
$370.00

AEM - Water/Methanol Failsafe Device (Metric 4mm)
AEM has renamed its Injection Monitor the AEM Water/Methanol FAILSAFE Device. This unit is the most advanced water/methanol failsafe device on the market, as it actively monitors the injection system's ENTIRE flow curve to compensate for failure under ANY condition, allowing you to use your water/methanol system with complete peace of mind. If you have a water/methanol injection system or are considering one, you will not find a more advanced failsafe device on the market than the AEM Water/Methanol FAILSAFE Device. *WHY YOU NEED THIS* Today's water/methanol injection systems have proven themselves as a viable means for effectively reducing engine inlet air temperatures and suppressing harmful detonation. This allows enthusiasts to reliably increase boost and advance ignition timing without the need for racing fuel. Despite the proven effectiveness and reliability of water/methanol injection, there exists a potential for engine damage if the water/methanol tank runs dry, if the pump stops working or more commonly if flow volume decreases due to fuel contamination, a clogged nozzle or a leak in the system. While failsafe devices for water/methanol are not new, competitors' failsafe systems have limitations that do not allow them to completely protect your engine if the water/methanol injection system stops flowing. Most failsafe devices have settings for high and low range flow parameters, but only monitor flow at a single point. And, without actually calculating volume versus time to establish a flow rate, instead running the system at full blast and using the nozzle's potential for flow as your established flow rate, it is impossible to know the actual flow of the water/methanol system. Short version: if you think you are flowing 500cc/min and are actually flowing 300cc/min, and you are relying on your failsafe to trigger an alarm at a single reference point using 500cc/min of flow as your reference, then you have created the potential for engine damage. Other competitors' failsafe systems use a flow meter to establish water/methanol flow and utilize an external adjustment to trigger an alarm if the system does not detect maximum flow, using a time-delay strategy to compensate for part throttle operation. The problem is, water/methanol flow is rarely zero or maximum flow, and with all of the potential flow rates one can experience, a time delay strategy is not completely failsafe. *WHAT MAKES AEM'S WATER/METHANOL FAILSAFE DEVICE UNIQUE* AEM's Water/Methanol FAILSAFE Device actively monitors the entire flow curve independent of pressure, continuously collecting flow vs. injection rate data so that any deviation from your established flow curve will trigger an alarm output that can be used to reduce boost or timing, change maps, add fuel, trigger a two-step or perform practically any action you choose to save your engine. It is PC programmable (with USB connectivity) which eliminates the guesswork when setting min/max threshold parameters. It features PC-based software and an auto-scaling flow map that simplifies set up, and has an "Auto Set" feature that will create a baseline configuration. A video showing its ease of set up is on www.aemelectronics.com. And it will work on virtually ANY water/methanol injection system that uses 1/4" OD or 4mm OD tubing! *HOW IT WORKS* Should an alarm trigger, the AEM Water/Methanol FAILSAFE Device has one low-side (ground) driver and one high-side (+12v) driver that can be configured to turn on or off during an alarm condition. For instance, late-model Subaru WRX STi owners can connect the low-side driver to the "limp" wire behind the kick panel that will dump boost and pull timing via the factory ECU. If you have a supercharged Chevy 350cid small-block, you can use it to pull timing from a switched aftermarket ignition system. The possibilities are endless. A high-tech analog gauge is included with the AEM Water/Methanol FAILSAFE Device, with programmable backlighting to match your factory gauges. The gauge needle and backlighting can be configured to flash when an alarm is triggered to notify of a potential system error. This system also includes an internal data logger that records injection and alarm status data for future reference. *Water/Methanol FAILSAFE Device Racer Features:* * Actively monitors the entire water/methanol fuel injection curve to trigger an alarm event under any defined adverse condition! * Can be used on virtually all water/methanol injection systems with either 1/4" or 4mm OD tubing * "Auto Set" feature automatically creates baseline configuration * Built-in warning lights inform user of an alarm trigger * Internal data logger records all injection flow and alarm status data * Included high-tech analog gauge has black and white faceplates and bezels to match vehicle interior, and is programmable for either 0-500cc/min or 0-1000cc/min flow ranges * Gauge alarm and backlighting are user programmable to match interior lighting *Water/Methanol FAILSAFE Device Tuner Features:* * Tunable PC-based software with USB connectivity * One low-side (ground) driver and one high-side (+12V) driver can be configured to turn on or off during an alarm condition * Fully adjustable alarm delay and reset period * 0-5v Analog output for use with data loggers and virtually all engine management systems * Auxiliary input for use with AEM Water/Methanol "Boost Safe" feature can trigger an alarm event if there is a system readiness issue (open circuit, short circuit, low fluid level, etc.) * Precision flow sensor included
Read More
Read Less
Returns Policy

Our return policy varies between products on whether you can return it or not. We do stand by the policy that ALL POSSIBLE returned products will be charged with a 20% Restocking Fee. NO FULL REFUNDS. If you have any questions about returning your items please contact our reps at 732-638-5268 or email returns@onlinetsm.com

Shipping

We stand by our policy of same day shipping on all in stock items if purchased before 4:30 PM (Eastern-Time). If an item is not in stock, you will have an update as to when your item will ship within 24 hours. Below is a map locating where we do our one day shipping to. If you have any questions about shipping make sure to call our reps today at 732-638-5268.

Lost/Stolen Package

If, by any chance, your package has been lost/stolen YOU (THE BUYER) are responsible for working with the carrier and us, Tri-State Motorsports, to recover your package. You are responsible for contacting us and the shipping company within 48 hours of delivery for lost or damage claims. We DO NOT refund or reship product for claims that are denied by the shipping company.

NOTE: Once the products have been shipped, the order CAN NOT be canceled.

Main Shipping Carrier: UPS

Does this product fit my Vehicle?

Please read the 'Description' tab carefully. We try our best to put vehicle fitment information on all of our products description. If by any chance your vehicle is not listed and you have a question, feel free to ask one of our experts at 1 (844) - 442-8118 . Please have the product SKU ready.

When will this product ship out?

If the product is in-stock and the order is placed before our shipping cut-off time (4:30PM Eastern-Time), your product will ship the same day. If the product is not in stock, you will have an update as to when your item will ship within 24 hours. Click on the 'Shipping & Returns' tab to view the map locating where we do our one day shipping to. If you have any questions about shipping make sure to call our reps today at 1 (844) - 442-8118.

What's the Warranty on this product?

Unless the product is manufactured by Tri-State Motorsports or TSM Race, ALL Warranties go through the Manufacture directly. Please visit their official website and get in contact with them in regards to your warranty. We will supply you with any invoice or tracking information the manufacture asks you for.

How can I finance this product with Affirm?
Affirm Loan-Application Process Steps:

1. At checkout, choose Pay with Affirm

2. Affirm prompts you to enter a few pieces of information: Name, email, mobile phone number, date of birth, and the last four digits of your social security number. This information must be consistent and your own!

3. To ensure that you're the person making the purchase, Affirm sends a text message to your cell phone with a unique autorization code.

4. Enter the authorization code into the application form. Within a few seconds, Affirm notifies you of the loan amount you're approved for, the interest rate, and the number of months you have to pay off your loan. You have the option to pay off your loan over three, six, or twelve months. Affirm states the amount of your fixed, monthly payments and the total amount of interest you'll pay over the course of the loan.

5. To accept Affirm's financing offer, click Confirm Loan and you're done.

Customer Reviews

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×
Sale

Unavailable

Sold Out