K-Tuned - Race-Spec Billet RSX Shifter with Pro Shift Cut
If you take a look inside some of the fastest K-powered cars, there is a pretty good chance that you'll find our award winning K-Tuned Billet RSX Shifter mounted on the floor beside the driverÍs seat. Over the last few years, our shifters have set the bar pretty high and we have just raised it again by releasing our Race-Spec Billet RSX Shifter with a Programmable Shift Cut Sensor. This sensor is mounted on the back of the shifter and uses Hall Effect technology (just like our TPS) to accurately measure front to back shift throw and convert it into a voltage reading. The system functions very similar to a TPS sensor but instead of measuring throttle plate position it measures actual shifter positon. This information can be very useful for some race applications because the data the sensor provides can be connected to a programmable ecu input, to signal an ignition timing cut at set points during shifts. Operation is comparable to expensive strain gauge setups with one pretty big advantage; you do not have to let go of the shifter after every shift. Taking your hand off, can be very hard for some drivers to learn especially for those who have a habit of holding the shifter almost constantly. The 3 wire sensor can be supplied with any ecu voltage between 5V and 16V, so it will work on just about any ecu input circuit. When connected, the ecu will be able to read the exact shifter position and an experienced tuner will now be able to calibrate the exact positions where the ignition timing cut is engaged. For users who do not have experience creating tables and programming ecus to read signal inputs, we have developed a programmable interface unit that simplifies things quite a bit. The interface reads shifter position based on a 5V circuit, so only the 2 engagement points, activate and stop, need to be set. Using a single button on the unit, the user will be able to set the exact operating window of the shift cut signal. The output signal leaving the interface unit will essentially become the on/off switch for the ignition cut and can be set up as a positive or ground signal. The Race-Spec Billet RSX Shifter with Pro Shift Cut is currently compatible with AEM Infinity, Haltech and Motec systems which all have programmable ecu inputs. The programmable interface unit will be needed for K-Pro applications and is purchased as an add-on option. We want to note that the Pro Shift Cut is not a bolt on option for existing shifters. It is only offered as a complete shifter with the sensor already mounted in place and ready for use. The shifter comes with a set of preset shift stops, to prevent over-shifting and a centering tool for perfect setup of our adjustable K-Tuned race-spec shift cables.
Our return policy varies between products on whether you can return it or not. We do stand by the policy that ALL POSSIBLE returned products will be charged with a 20% Restocking Fee. NO FULL REFUNDS. If you have any questions about returning your items please contact our reps at 732-638-5268 or email firstname.lastname@example.org
We stand by our policy of same day shipping on all in stock items if purchased before 4:30 PM (Eastern-Time). If an item is not in stock, you will have an update as to when your item will ship within 24 hours. Below is a map locating where we do our one day shipping to. If you have any questions about shipping make sure to call our reps today at 732-638-5268.
If, by any chance, your package has been lost/stolen YOU (THE BUYER) are responsible for working with the carrier and us, Tri-State Motorsports, to recover your package. You are responsible for contacting us and the shipping company within 48 hours of delivery for lost or damage claims. We DO NOT refund or reship product for claims that are denied by the shipping company.
NOTE: Once the products have been shipped, the order CAN NOT be canceled.
Main Shipping Carrier: UPS
Does this product fit my Vehicle?
Please read the 'Description' tab carefully. We try our best to put vehicle fitment information on all of our products description. If by any chance your vehicle is not listed and you have a question, feel free to ask one of our experts at 1 (844) - 442-8118 . Please have the product SKU ready.
When will this product ship out?
If the product is in-stock and the order is placed before our shipping cut-off time (4:30PM Eastern-Time), your product will ship the same day. If the product is not in stock, you will have an update as to when your item will ship within 24 hours. Click on the 'Shipping & Returns' tab to view the map locating where we do our one day shipping to. If you have any questions about shipping make sure to call our reps today at 1 (844) - 442-8118.
What's the Warranty on this product?
Unless the product is manufactured by Tri-State Motorsports or TSM Race, ALL Warranties go through the Manufacture directly. Please visit their official website and get in contact with them in regards to your warranty. We will supply you with any invoice or tracking information the manufacture asks you for.
How can I finance this product with Affirm?
Affirm Loan-Application Process Steps:
1. At checkout, choose Pay with Affirm
2. Affirm prompts you to enter a few pieces of information: Name, email, mobile phone number, date of birth, and the last four digits of your social security number. This information must be consistent and your own!
3. To ensure that you're the person making the purchase, Affirm sends a text message to your cell phone with a unique autorization code.
4. Enter the authorization code into the application form. Within a few seconds, Affirm notifies you of the loan amount you're approved for, the interest rate, and the number of months you have to pay off your loan. You have the option to pay off your loan over three, six, or twelve months. Affirm states the amount of your fixed, monthly payments and the total amount of interest you'll pay over the course of the loan.
5. To accept Affirm's financing offer, click Confirm Loan and you're done.