DescriptionOur D-series & B-Series OBD1 Mil-spec wire harness is cross-compatible with both engine types.MADE IN THE U.S.A.There are quite a few options available.Please look through them carefully to make sure you get the right connectors!Component Type: Select your connector types.Fuel Injector Plug Type: (Select "BOSCHEV1/HONDA OBD1" by default)The Injector plug dropdown menu has all the options you would need if you require a different Injector type only.Vehicle Type: Select your vehicles chassis type.This tells us what interior "Chassis Adapter" you need.Charge Harness: The "1-piece charge harness" option will add the Starter & Alternator leads to the fuse box that goes through the firewall.Add Quick Disconnect Plug:This adds fire-wall separation plug and cleanly attaches with the quick disconnect plate above.Add VTEC Pressure switch plug: This adds a bolt to put in place of the un-used VTEC Oil pressure sensor if you wish to remove it for a cleaner look.Add ECU Jumper: Add the OBD1 to OBD2a ECU adapter. Our D-series & B-Series OBD1 Mil-spec wire harness is cross-compatible with both engine types.This harness uses Mil-Spec Teflon coated wire with a maximum heat rating of 200°C .Standard wall ethylene-tetrafluoroehtylene (ETFE) insulation ( also known as Tefzel ) designed for aerospace applications where weight, dimensional tolerance, and mechanical durability are required. This wire exhibits high chemical and radiation resistance. The Teflon coated wire is loomed with The highest quality Raychem DR-25 heat shrink covering, and adhesive lined wire junctions to keep moisture out.Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a yellow identification labels for easy installation. All heavy interference circuits are protected and grounded with proper wire covering.Rywire also offers a Firewall mounted Mil-Spec connector that will allow easy engine removal for quick engine changes and customization. It can be added to any Mil-Spec wire harness.All connectors and materials are new. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a white identification label for easy installation. All heavy interference circuits are protected and grounded with proper wire covering. Our engine harnesses are 100% quality tested pin to pin; And resistance checked to ensure no voltage fluctuations.All Rywire engine harnesses are made with OBD1 (92-95) ECU Connectors. An ECU adapter can be used for OBD2 ECU's if necessary however our harness does not support USDM OBD2 ECU's. Aftermarket ECU's using OBD2 plugs and Non-US OBD2 ECU's are compatible (except for H22 and GSR stock computers).Each harness will come with a custom back side sub-harness that will be proprietary to the chassis you choose on the drop down menu. This way if you ever change chassis you will only need a new sub-harness, not a whole new wire loom!These harnesses are warrantied and guaranteed to work, however they are non-refundable. Because the back-side (interior/shock tower connection) separates from the main harness, the engine harness can be used on multiple chassis provided the engine itself uses the same components. We sell the back-side harness separately only over the phone for previous engine harness customers. Chassis adapter options This harness can plug and play into any chassis, but we recommend our Rywire standalone RACE fuse box http://www.rywire.com/product-p/b-sub-race.htm This fuse box allows for a quick and easy install into any chassis, off road car, sand rail, buggy, gutted circuit or drag race car.This harness with the RACE fuse/relay box can also be plug and play with our SWITCH PANELhttp://www.rywire.com/product-p/ry-switch-6.htmThe engine harness, fuse/relay box, and switch panel are all PLUG AND PLAY making your life much easier!MADE IN THE U.S.A. HARNESS CONNECTOR LIST: • Oil Pressure Sending Unit • Knock Sensor • Intake Air Temperature (Intake Manifold Style) • Oxygen Sensor (Primary 4 Wire) • Alternator • 2 Extra Wires • Injector 1-4 • MAP Sensor • TPS (Throttle position) • Idle Control Motor • Electronic Speed Sensor • Ground • Fan Switch • OBD1 Distributor plugs • h20 Sending Unit (for Gauge Cluster) • Reverse Lights • Engine Coolant Temp • Starter Signal • VTEC Solenoid • OBD1 ECU Plugs A,B,D • Power Distribution Cap
Shipping & Returns
It is important to make sure you are ordering the correct items as ALL sales are final. THERE ARE NO FULL REFUNDS. Returns: Returns must be made within 15 days after delivery in brand new unopened condition. ALL returns are subject to a 20% restocking fee. Items that are returned must be returned inside of a box, packaging that is damaged will be refused.
We stand by our policy of same day shipping on all in stock items if purchased before 4:30 PM (Eastern-Time). If an item is not in stock, you will have an update as to when your item will ship within 24 hours. Below is a map locating where we do our one day shipping to. If you have any questions about shipping make sure to email us at firstname.lastname@example.org or call our reps today at 732-638-5268.
If by any chance, your package that has been delivered by the carrier is lost/stolen, YOU (THE BUYER) are responsible for working with the carrier and us, Tri-State Motorsports to recover your package. You must contact us and the shipping company within 48 hours of delivery for lost/damage claims. You are covered by the basic insurance amount APPROVED by the shipping center. We DO NOT refund or reship product for claims that are denied by the shipping company.
NOTE: Once the products have been shipped, the order CAN NOT be canceled.
Main Shipping Carrier: UPS
Does this product fit my Vehicle?
Please read the Description carefully. We try our best to put vehicle fitment information on all of our products description. If by any chance your vehicle is not listed and you have a question, feel free to email one of your experts at email@example.com. Please have the product SKU ready.
When will this product ship out?
If the product is in-stock and the order is placed before our shipping cut-off time (4:30PM Eastern-Time), your product will ship the same day. If the product is not in stock, you will have an update as to when your item will ship within 24 hours. Click on the 'Shipping & Returns' tab to view the map locating where we do our one day shipping to. If you have any questions about shipping make sure to call our reps today at 1 (844) - 442-8118.
What's the Warranty on this product?
Unless the product is manufactured by Tri-State Motorsports or TSM Race, ALL Warranties go through the Manufacture directly. Please visit their official website and get in contact with them in regards to your warranty. We will supply you with any invoice or tracking information the manufacture asks you for.
How can I finance this product with Affirm?Affirm Loan-Application Process Steps:
- At checkout, choose Pay with Affirm
- Affirm prompts you to enter a few pieces of information: Name, email, mobile phone number, date of birth, and the last four digits of your social security number. This information must be consistent and your own!
- To ensure that you're the person making the purchase, Affirm sends a text message to your cell phone with a unique autorization code.
- Enter the authorization code into the application form. Within a few seconds, Affirm notifies you of the loan amount you're approved for, the interest rate, and the number of months you have to pay off your loan. You have the option to pay off your loan over three, six, or twelve months. Affirm states the amount of your fixed, monthly payments and the total amount of interest you'll pay over the course of the loan.
- To accept Affirm's financing offer, click Confirm Loan and you're done.