Skip to product information
1 of 2

BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Red

BMR 82-02 3rd Gen F-Body Rear Hollow 25mm Sway Bar Kit w/ Bushings - Red

SKU:BMRSB003R

Category: Sway Bars
Vendor: BMR Suspension
Regular price $269.95
Regular price Sale price $269.95
Sale Sold out
Shipping calculated at checkout.
1 in stock
🔥 sold in last hours
The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR Suspensions SB003 rear sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-wall 25mm DOM tubing, the SB003 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The SB003 attaches to your Camaro with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The fabricated laser cut, TIG-welded steel sway bar end links are reinforced to minimize deflection.BMR Suspension designed the SB003 sway bar for street performance, drag race, autocross, and road race applications. The SB003 gives you a 149% increase in rate over the stock bar (depending on year and model). These rate increases allow you to fine-tune the handling characteristics of the suspension so you can drive harder through corners with minimal body roll. The hollow design allows for loads of strength without adding a lot of weight. This allows for more sway bar control, which equals better handling. When performance is a must, rely on BMR Suspension!BMR Suspensions SB003 sway bars are available in black hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U.S.A.!All kits come with polyurethane mounting bushings and endlink kits.

This Part Fits:

Year Make Model Submodel
1988,1993-2002 Chevrolet Camaro Base
1982-1986 Chevrolet Camaro Berlinetta
1993 Chevrolet Camaro Indianapolis 500 Pace Car
1985-1990 Chevrolet Camaro Iroc-Z
1987 Chevrolet Camaro LT
1989-1992,1996-1997 Chevrolet Camaro RS
1992 Chevrolet Camaro RS Heritage Edition
1982-1987 Chevrolet Camaro Sport
1982-1987,1991-2002 Chevrolet Camaro Z28
1992 Chevrolet Camaro Z28 Heritage Edition
1982 Chevrolet Camaro Z28 Indianapolis 500 Pace Car
1998-2002 Chevrolet Camaro Z28 SS
1982-2002 Pontiac Firebird Base
1989-2002 Pontiac Firebird Formula
1982-1986 Pontiac Firebird S/E
1982-2002 Pontiac Firebird Trans Am
1994 Pontiac Firebird Trans Am GT
1989-1992 Pontiac Firebird Trans Am GTA
1989 Pontiac Firebird Trans Am GTA SE

Shipping & Delivery

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations. For international orders, please Contact Us. If you select US shipping rates and are shipping internationally, please be advised you will be contacted to compensate the difference in shipping fees.

Processing takes about 3 to 5 business days before your order ships. We do not process or ship orders on weekends. If you order an item that's on backorder, we will reach out with an estimated arrival time. If you have any questions about shipping make sure to email us at sales@onlinetsm.com or call our reps today at 732-638-5268.

If by any chance, your package that has been delivered by the carrier is lost/stolen, YOU (THE BUYER) are responsible for working with the carrier and us, Tri-State Motorsports to recover your package. You must contact us and the shipping company within 48 hours of delivery for lost/damage claims. You are covered by the basic insurance amount APPROVED by the shipping center. We DO NOT refund or reship product for claims that are denied by the shipping company.

FAQs

When will my product ship out?

Processing takes about 3 to 5 days before your order ships. Some orders may take longer than usual to process and ship. If you order an item that's on backorder, we will reach out with an estimated arrival time. Refunds are subject to a 20% restocking fee. Cancellations are subject to 10% cancellation/processing fee under no exceptions.

What's the Warranty on our products?

Unless the product is manufactured by Tri-State Motorsports or TSM Race, ALL Warranties go through the Manufacturer directly. Please visit their official website and get in contact with them in regards to your warranty. We will supply you with any invoice or tracking information the manufacturer asks you for.

Do you offer any promotions?

One of our major promotions is the TSM Bucks Loyalty Program. You will earn 1 TSM point for every dollar you spend with us. These points can be redeemed for rewards when you reach certain thresholds. 

TSM Bucks Info

If you subscribe to marketing emails, you will be given a discount code for 5% off your order that you can use at any time. Our Instagram page also has a variety of weekly promotions in our stories and posts. Some restrictions may apply depending on MAP policies.

What payment methods are accepted?

Tri-State Motorsports accepts American Express, Discover, Mastercard, and Visa. You can also pay over time with Affirm and Klarna. Express checkout methods include:

  • Apple Pay
  • Google Pay
  • Meta Pay
  • PayPal
  • Shop Pay
  • Venmo

How can I finance my purchase with Affirm?

Learn More On Affirm

How can I finance my purchase with Klarna?

Learn More On Klarna

View full details