Skip to product information
1 of 9

Edelbrock Pro Flo 4 EFI System Seq Port Chrysler Gen II Hemi 426-572 950 Max HP 60lb/hr Satin Finish

Edelbrock Pro Flo 4 EFI System Seq Port Chrysler Gen II Hemi 426-572 950 Max HP 60lb/hr Satin Finish

SKU:EDE35670

Category: Fuel Injection Control Modules
Vendor: Edelbrock
Regular price $3,239.95
Regular price Sale price $3,239.95
Sale Sold out
Shipping calculated at checkout.

Special Order

Pro-Flo 4 Dual-Quad HEMI EFI System #35670 is intended for use with1964-71 Mopar Gen II 426-572 HEMI engines operating in the 2,500-6,500+ RPM range. This EFI incorporates a single-plane Air-Gap design manifold with dual square-bore 4150-style throttle bodies that bolts directly onto vehicles with a shaker hood. The Dual-Quad HEMI EFI manifold is compatible with factory-style cylinder heads but optimized for use with Victor Jr. HEMI heads. Manifold comes preassembled and ready to run with throttle bodies, 60 lb/hr injectors and fuel rails. Also included is a single-connection distributor designed to work specifically with Pro-Flo 4 providing fully sequential-port injection and infinite control over ignition and fuel events under all conditions. This system is rated for 825 horsepower at 43 PSI with all supporting sensors, ECU, wire harnesses and 7-inch Android tablet included for a streamlined installation. Key advancements of Pro-Flo 4 EFI are its Self-Calibrating Fuel Map Technology, Wide-Band O2 Closed Loop Mixture Control, and new low-profile ECU with faster processor and upgraded Bluetooth chip for reliable connectivity with the E-Tuner app that comes preinstalled on the tablet. The E-Tuner includes a Setup Wizard to guide you through setup and provides fuel and spark adjustability for complete control over the system. Pro-Flo 4 EFI does not require laptop tuning. Minimal setup and tuning adjustments are required with base calibrations provided in the software. The ECU is self-learning and will continually adjust the fuel injection calibration to get the maximum performance out of your engine by maintaining a specified target air-fuel ratio as you drive. The E-Tuner provides the ability to fine-tune air-fuel ratios, ignition curve, idle speed, acceleration fuel, fans, rev-limiter and more. Multiple displays let you monitor engine performance in real-time from inside or outside of the vehicle while retaining the simplicity that Pro-Flo 4 systems are known for.

This Part Fits:

Year Make Model Submodel
1963-1964 Dodge 330 Base
1963-1964 Dodge 440 Base
1965 Dodge 880 Base
1964-1965 Dodge 880 Custom
1970-1971 Dodge Challenger Base
1970-1971 Dodge Challenger R/T
1969-1971 Dodge Charger 500
1966-1971 Dodge Charger Base
1969 Dodge Charger Daytona
1967-1971 Dodge Charger R/T
1969 Dodge Charger SE
1971 Dodge Charger Special Edition
1971 Dodge Charger Super Bee
1965-1970 Dodge Coronet 440
1965-1970 Dodge Coronet 500
1965-1966,1970-1971 Dodge Coronet Base
1971 Dodge Coronet Brougham
1971 Dodge Coronet Crestwood
1971 Dodge Coronet Custom
1966-1970 Dodge Coronet Deluxe
1967-1970 Dodge Coronet R/T
1968-1970 Dodge Coronet Super Bee
1965 Dodge Monaco Base
1963 Dodge Polara 500
1963-1965 Dodge Polara Base

Shipping & Delivery

We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations. For international orders, please Contact Us. If you select US shipping rates and are shipping internationally, please be advised you will be contacted to compensate the difference in shipping fees.

Processing takes about 3 to 5 business days before your order ships. We do not process or ship orders on weekends. If you order an item that's on backorder, we will reach out with an estimated arrival time. If you have any questions about shipping make sure to email us at sales@onlinetsm.com or call our reps today at 732-638-5268.

If by any chance, your package that has been delivered by the carrier is lost/stolen, YOU (THE BUYER) are responsible for working with the carrier and us, Tri-State Motorsports to recover your package. You must contact us and the shipping company within 48 hours of delivery for lost/damage claims. You are covered by the basic insurance amount APPROVED by the shipping center. We DO NOT refund or reship product for claims that are denied by the shipping company.

FAQs

When will my product ship out?

Processing takes about 3 to 5 days before your order ships. Some orders may take longer than usual to process and ship. If you order an item that's on backorder, we will reach out with an estimated arrival time. Refunds are subject to a 20% restocking fee. Cancellations are subject to 10% cancellation/processing fee under no exceptions.

What's the Warranty on our products?

Unless the product is manufactured by Tri-State Motorsports or TSM Race, ALL Warranties go through the Manufacturer directly. Please visit their official website and get in contact with them in regards to your warranty. We will supply you with any invoice or tracking information the manufacturer asks you for.

Do you offer any promotions?

One of our major promotions is the TSM Bucks Loyalty Program. You will earn 1 TSM point for every dollar you spend with us. These points can be redeemed for rewards when you reach certain thresholds. 

TSM Bucks Info

If you subscribe to marketing emails, you will be given a discount code for 5% off your order that you can use at any time. Our Instagram page also has a variety of weekly promotions in our stories and posts. Some restrictions may apply depending on MAP policies.

What payment methods are accepted?

Tri-State Motorsports accepts American Express, Discover, Mastercard, and Visa. You can also pay over time with Affirm and Klarna. Express checkout methods include:

  • Apple Pay
  • Google Pay
  • Meta Pay
  • PayPal
  • Shop Pay
  • Venmo

How can I finance my purchase with Affirm?

Learn More On Affirm

How can I finance my purchase with Klarna?

Learn More On Klarna

View full details