The EXEDY Hyper Single Series clutch is engineered to optimize the performance of cars that are moderately modified, but do not require the clutch capacity of a multi-plate clutch. Similar to our multi-plate clutches, it has a purple anodized, forged aluminum cover. The aluminum cover is stiffer than a stamped cover and therefore allows a higher lever ratio to maintain the pedal efforts at a reasonable level. There is no clamp load deflection as found in a pressed metal type cover. Additionally, the pressure plate features a series of turbine-like, air flow enhancing vanes that keep the clutch cooler under extreme operating conditions to improve wear life.
All Hyper Single clutches come with a chromoly steel flywheel and are normally supplied with a 6-puck cerametallic facing and a spring center damper disc assembly. However, on select vehicles, the new VF (Various Friction) disc may be offered. The chromoly flywheel is lighter than OEM for improved engine response, and a lighter overall assembly. The disc is generally smaller and thinner than the OEM disc making for lower inertia and therefore quicker, easier shifting and less wear and tear on the transmission synchros. The higher clamp load and cerametallic friction facings give approximately twice the holding torque of the OEM clutch and higher than other single disc clutches.
*6-Puck Cerametallic Disc*
High friction coefficient, low wear, and a special heat resistant material [T5001] has been applied to enable the clutch size to be reduced which in turn lowers mass inertia and improves shift responses for faster gear changes particularly in racing applications. Durability is improved with the use of a stronger, smaller damper disc, designed especially for the Hyper Single clutch.
*VF (Various Friction) Disc*
The VF enables the driver to operate the clutch through an easy-to-feel half engagement thanks to the Ultra Fiber friction material all while having a high heat dissipation and torque capacity due to the integrated metal facing. Furthermore, pedal effort has been drastically reduced and improved by the re-engineering and re-designing of the engagement point with newly developed cushioning plates.
*All EXEDY Racing Hyper Single Series Clutch Kits carry SFI 1.1 Certification. Which means, when you buy these products, you can be confident they are certified for use in competitive motorsports.*
- Clamp Load: 2023
- Disc Diameter (Inches): 7.9
- Disc Diameter (Millimeters): 200
- Kit Contents: CH06S, DH04D, FH09, BS04
- Spline Count: 24
- Spline Size (Inches): 1
- Spline Size (Millimeters): 26
- Torque Capacity (ft/lbs.): 235
*PLEASE NOTE: All referenced torque ratings are measured at the wheels.*
Shipping & Returns
It is important to make sure you are ordering the correct items as ALL sales are final. THERE ARE NO FULL REFUNDS. Returns: Returns must be made within 15 days after delivery in brand new unopened condition. ALL returns are subject to a 20% restocking fee. Items that are returned must be returned inside of a box, packaging that is damaged will be refused.
We stand by our policy of same day shipping on all in stock items if purchased before 4:30 PM (Eastern-Time). If an item is not in stock, you will have an update as to when your item will ship within 24 hours. Below is a map locating where we do our one day shipping to. If you have any questions about shipping make sure to email us at email@example.com or call our reps today at 732-638-5268.
If by any chance, your package that has been delivered by the carrier is lost/stolen, YOU (THE BUYER) are responsible for working with the carrier and us, Tri-State Motorsports to recover your package. You must contact us and the shipping company within 48 hours of delivery for lost/damage claims. You are covered by the basic insurance amount APPROVED by the shipping center. We DO NOT refund or reship product for claims that are denied by the shipping company.
NOTE: Once the products have been shipped, the order CAN NOT be canceled.
Main Shipping Carrier: UPS
Does this product fit my Vehicle?
Please read the Description carefully. We try our best to put vehicle fitment information on all of our products description. If by any chance your vehicle is not listed and you have a question, feel free to email one of your experts at firstname.lastname@example.org. Please have the product SKU ready.
When will this product ship out?
If the product is in-stock and the order is placed before our shipping cut-off time (4:30PM Eastern-Time), your product will ship the same day. If the product is not in stock, you will have an update as to when your item will ship within 24 hours. Click on the 'Shipping & Returns' tab to view the map locating where we do our one day shipping to. If you have any questions about shipping make sure to call our reps today at 1 (844) - 442-8118.
What's the Warranty on this product?
Unless the product is manufactured by Tri-State Motorsports or TSM Race, ALL Warranties go through the Manufacture directly. Please visit their official website and get in contact with them in regards to your warranty. We will supply you with any invoice or tracking information the manufacture asks you for.
How can I finance this product with Affirm?Affirm Loan-Application Process Steps:
- At checkout, choose Pay with Affirm
- Affirm prompts you to enter a few pieces of information: Name, email, mobile phone number, date of birth, and the last four digits of your social security number. This information must be consistent and your own!
- To ensure that you're the person making the purchase, Affirm sends a text message to your cell phone with a unique autorization code.
- Enter the authorization code into the application form. Within a few seconds, Affirm notifies you of the loan amount you're approved for, the interest rate, and the number of months you have to pay off your loan. You have the option to pay off your loan over three, six, or twelve months. Affirm states the amount of your fixed, monthly payments and the total amount of interest you'll pay over the course of the loan.
- To accept Affirm's financing offer, click Confirm Loan and you're done.